Real-time Data Sensors

Telemetry for this site was lost on 3 October 2009 due to damage caused by falling trees. Web posting of monitoring results from this site is suspended indefinitely.

Ground-surface Displacement & Temperature

Ground-surface displacement is monitored by cable extension transducers (displacement meters on the site map). These devices consist of an instrument mounted on a post and an anchor line extending from the instrument to an additional post. The devices measure extension of cable from the instrument. Changes in extension indicate potential ground-surface displacement. However, the anchor lines consist of very fine wire that is suspended about a few meters in the air. Therefore, these wires are susceptible to snow, ice, and wind loads, and damage from wildlife and treefall, which is particularly frequent at this site due to the many dead, standing trees that resulted from the 2002 Missionary Ridge wildfire.

Shallow Subsurface Orientation & Rainfall

Shallow subsurface orientation is measured by tiltmeters. These devices measure orientation along two axes and are set in concrete poured on or near bedrock at depths of about two meters (the devices are buried by about two meters of soil). The orientations along both the X and Y axes of the tiltmeters are shown on the graph (for example, X1 on the graph indicates the tilt along the X axis of tiltmeter 1). Landslide movement would probably result in sufficient change of orientation of the tiltmeters to be detected. The tiltmeters are much less vulnerable than the cable extension transducers to false indications of displacement. However, frost penetration to the depth of the tiltmeters would probably result in such false indications. The tiltmeters are equipped with temperature sensors to assist in determining potential frost effects.

Field Layout